Aquarium Tank + V


Item condition:
Time left:
$329.99 Buy It Now
Item location:
Ships to:
Item specifics
  • Brand:
    Trigger Systems
  • Water Type:
    All Water Types
  • Type:
    Sump Tank
  • Tank Material:
  • UPC:
    Does not apply

The Triton series is designed to work with the Triton method which is becoming increasingly popular as it does not require water changes, which no one enjoys. One of the main requirements for the Triton method is to have a refugium sized at roughly 10% of the display tank volume. The TRITON26 refugium will hold over 6 gallons when at the highest water level setting (11.5″) allowing it to support tanks up to around 75 gallons. Some of the features of the TRITON26 are:
  • Refugium clear polycarbonate lid
  • Algae blocker
  • Independent water level control in refugium and skimmer sections
  • Cable/Hose organizers
  • Media platform with foam filter block
  • Laser engraved water level indicator
  • Four position countersunk probe holder
  • Quick connect 1/4″ hose input fittings for dosing and ATO inputs, one in refugium section and four in return section
  • Aquamarine blue coloring accents, solid white bottom and smoke back and around refugium section to block light and prevent unwanted algae growth in other sections

    The TRITON26 has 3 main sections. Water enters the sump through the input fittings. Water then flows through the large refugium section that has a lid to prevent noise and water evaporation. Water then flows through the overflow teeth in the adjustable wall into Section 2.
    Section 2 is typically where the protein skimmer is located. Water purposely exits Section 2 by flowing under the aquamarine wall to allow proteins to remain at the surface maximizing the potential for the protein skimmer to extract from the system. The water then flows through the media platform and foam filter block into Section 3. The media platform can be used to allow for several different filtration methods (bag of carbon, bio balls, bio media, rubble rock, etc.).
    Section 3 is the return section where the return pump will sit, pumping water back to the display tank.


    1. Two 1″ input fittings
    2. Quick connect hose inputs for dosing and ATO (x1 in refugium, x4 in return)
    3. Refugium clear polycarbonate lid
    4. Cutout to allow mounting of refugium light
    5. Cable/Hose organizer (x2)
    6. 4 position probe holder with countersunk holes
    7. Laser engraved water level indicator
    8. Adjustable water level in skimmer section
    9. Media platform with foam filter block
    10. Adjustable water level in refugium section
    11. Algae blocker

    Water level in the skimmer section is adjustable from 7″ to 9.5″ to accommodate for the water height requirements for different protein skimmers. Simply move the adjustable wall to the desired height location (use the laser engraved water level indicator to assist) and then tighten the two bolts to hold in place.
    Water level in the refugium section is also adjustable (from 8″ to 11.5″). The TRITON method requires higher flow rate through the sump than most other methods. Depending on your flow settings through the refugium and skimmer sections, water noise and splashing may be an issue. We made both levels configurable so you can fine tune based on individual needs.

    Dimensions: 26″ long x 13″ wide x 15″ high
    Refugium Section:7.25″ x 12.5″ (~4-5 gallons)
    Skimmer Section: 10.5″ x 12.5″
    Return Pump Section: 5″ x 12.5″
    Total Water Volume: 20.4 gallons
    Refugium Water Level: 8″ to 11.5″ adjustable
    Skimmer Water Level: 7″ to 9.5″ adjustable
    Drain Input Fittings: 1″ (x2)

View more info...

See what other people are watching