65 gallon

60 Gallon - Residential PowerStor Series Single Wall Indirect Water Heater


Item condition:
New
Time left:
27d
Price:
$1,978.50 Buy It Now

Best Offer:
Make Offer
Shipping:
FREE
Item location:
USA
Ships to:
Worldwide
Item specifics
  • Brand:
    Bradford White
  • Model:
    SW-2-65-L
  • MPN:
    SW-2-65-L
  • UPC:
    013962151741

BTU Input: 157000 Capacity (Gallons): 60 Height (Inches): 59.25 Diameter (Inches): 22" Weight (lbs): 196 lbs Connection Type: Threaded Water Connection: 3/4" Test Pressure (PSI): 300 psi Working Pressure (PSI): 150 psi : Limited Lifetime Tank & Heat Exchanger/ 6- Limited on Component Parts Application: Plumbing

The Residential PowerStor Series Single Wall Indirect Water Heater was engineered to provide the lowest pressure drop, the highest hot water output and the highest amount of effective actual heat transfer area of any indirect fired water heater in the industry. Features: Heat Exchanger - Single-Wall 1 1/2" O.D. glass coated (Vitraglas ) carbon steel coil. The coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of 2.7 Gal. Maximum supply temperature from the boiler must not exceed 250�� F. Factory Installed Hydrojet Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank. Vitraglas Lining - Bradford White water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. The Bradford White high silica Vitraglas lining provides a tough interior surface for our hot water tanks. Immersed Adjustable Honeywell Aquastat - Fast acting immersion aquastat for automatic temperature control (adjustable from 80��F to 160��F). Supply and Return Connections - 1" NPT female connections are located on the front for both the boiler collector supply and return. 2" Non-CFC Foam Insulation - Covers the side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity. Potable Water Connections - 3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Three Protective Aluminum Anode Rods - Provide added protection against corrosion for long trouble-free service. Steel Tank - Heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining. T&P Relief Valve - Included. Brass Drain Valve. I=B=R Certified - These water heaters are rated by the Institute of Boiler and Radiation Manufacturers (I=B=R) to provide accurate performance data within the standards of the certification. The I=B=R rating is issued by the Hydronics Institute Division of GAMA and provide a recognized standard for proper comparison of hydronic appliances. NOTE: See Product Information/Specifications PDF for information on electrical specifications  FEATURESDESCRIPTIONSSHIPPINGPAYMENTRETURN POLICYGUIDE Internal Frame BagCamera BackpackDaypackCamping EquipmentPet SuppliesElectronic DevicesHome & GardenSports & OutdoorsOther

FriendlyNotice

Upon receipt of our items please ensure the order is correct. We rigorously test and check our items to meet the toughest standards prior to shipping, if you encounter any problems please contact us. We will do everything we can to make sure you are happy with your order.


60 Gallon - Residential PowerStor Series Single Wall Indirect Water Heater


 

Descriptions

BTU Input: 157000 Capacity (Gallons): 60 Height (Inches): 59.25 Diameter (Inches): 22" Weight (lbs): 196 lbs Connection Type: Threaded Water Connection: 3/4" Test Pressure (PSI): 300 psi Working Pressure (PSI): 150 psi : Limited Lifetime Tank & Heat Exchanger/ 6- Limited on Component Parts Application: Plumbing

The Residential PowerStor Series Single Wall Indirect Water Heater was engineered to provide the lowest pressure drop, the highest hot water output and the highest amount of effective actual heat transfer area of any indirect fired water heater in the industry. Features: Heat Exchanger - Single-Wall 1 1/2" O.D. glass coated (Vitraglas ) carbon steel coil. The coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of 2.7 Gal. Maximum supply temperature from the boiler must not exceed 250�� F. Factory Installed Hydrojet Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank. Vitraglas Lining - Bradford White water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. The Bradford White high silica Vitraglas lining provides a tough interior surface for our hot water tanks. Immersed Adjustable Honeywell Aquastat - Fast acting immersion aquastat for automatic temperature control (adjustable from 80��F to 160��F). Supply and Return Connections - 1" NPT female connections are located on the front for both the boiler collector supply and return. 2" Non-CFC Foam Insulation - Covers the side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity. Potable Water Connections - 3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Three Protective Aluminum Anode Rods - Provide added protection against corrosion for long trouble-free service. Steel Tank - Heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining. T&P Relief Valve - Included. Brass Drain Valve. I=B=R Certified - These water heaters are rated by the Institute of Boiler and Radiation Manufacturers (I=B=R) to provide accurate performance data within the standards of the certification. The I=B=R rating is issued by the Hydronics Institute Division of GAMA and provide a recognized standard for proper comparison of hydronic appliances. NOTE: See Product Information/Specifications PDF for information on electrical specifications 

Shipping

Option A: ShippingMethodStandard - Shipment will arrive in 1 to 6 business days on average.Unfortunately, we do not offer international shipping services at this time. We currently only ship within the 48 continental US states.If you would like an item to be shipped to a PO Box, Alaska, Hawaii, Puerto Rico or Guam, please contact us before check out to see if this may be accommodated. 

Payment

Option A: Paypal or eChecks via Paypal. Option B: Credit Cards (Visa, MasterCard and American Express) with a US billing address. 

Return Policy

If you are not satisfied, please contact me before leaving feedback so I may have the opportunity to fix any issues. If you would like to return an item, please keep it in original condition and inform us you would like to process a return. Full refunds will be issued for damaged, defective or inaccurately described products. Please notify us within 30 days for defective units, we will have a solution within 24 hours. For exchanges and/or returns other than quality issues, buyer is responsible for return shipping costs. 

Guide: How to make a best offer?

1.   Find a listing that accepts Best Offers.
2.   Click the Make Offer button. You may need to sign in.
3.   Enter your offer. If you want to include a note to the seller, click the Add your note link.
4.   Click the Review offer button.
5.   Review the information and click the Submit offer button.
 

Customer service is our passion. If you have any problems or questions, do not hesitate to contact us. We are happy to help!

 

View more info...


See what other people are watching