Apollo Electric

Holley 0-8007 390 CFM Classic 4bbl 4-Barrel Carburetor w/ Electric Choke

Item condition:
Time left:
$511.95 Buy It Now
Item location:
Ships to:
Item specifics
  • Brand:
  • Manufacturer Part Number:
  • MPN:
  • UPC:

America's Oldest Speed Shop® Lincoln, NE Holley 0-8007 390 CFM Classic Holley Carburetor w/ Electric Choke Sku # 4258007 Mfr. Part # 0-8007 Condition New Brand Holley Sold Each Details Info

Classic Holley carbs have been a staple for rodders around the world for decades. They're calibrated for use on stock to mildly modified vehicles and have that classic Holley look. Holley’s 0-8007 is calibrated and intended for small V8s or 6 cylinder engines as well as 2x4 street tunnel ram style set ups. Plus, it is Gold Dichromate coated for durability and classic Holley looks. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60's.

  • Gold Dichromate finish for corrosion resistance and classic Holley looks
  • Calibrated and Intended for small V-8 or 6 cyl. engines & 2 x 4 streettunnel ram set-ups
  • Factory preset electric choke for easy startups
  • Vacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing & transmissions to allow smooth opening of secondaries.
  • Single feed fuel inlet for easy installation
  • Power valve blow-out protection
  • Intake to carb gasket and air cleaner gasket included
Specs Sold in Quantity Each Fuel Type Gasoline Carburetor Barrels 4-Barrel Secondary Type Vacuum Carburetor Flange Type 4-Barrel Square Bore CFM 390 CFM MFG Gasket(s) Included Yes Finish Zinc Plated Booster straight Material Type Aluminum/Zinc GTIN Code 090127001486 CFM Range 300-399 CFM Bolt Hole Pattern 5.160" x 5.625" Reviews

Its a holley

Rated by reven on April 30, 2018

Summary: A ready to go

Yes, I recommend this product.

Great performance products for old Ford.

Rated by Baldie on August 20, 2017

Summary: I have purchased 2 Holley 390 cfm. 4 barrel carbs from you and earlier a Joe Hunt magneto style distributor to fit a 292 ci. Ford y-block. I have to fit the distributor in a tight spot due to the twin 4 barrel carbs being used. Once I have prepared the manifold it should look and perform real well. I will be back to purchase a progressive linkage from you soon. Thanks for your supply and help with the parts.

Pros: Most efficient business and helpful.

Yes, I recommend this product.

exactly what I was after

Rated by fred on July 07, 2017

Summary: fired up with miner adjustments doing great so far

Yes, I recommend this product.

Love Holley Carbs!

Rated by JBC on March 26, 2017

Summary: Not installed yet (too cold out!) but test fit with carb adapter, 4" riser, carb and very cool air cleaner and fit great and looks fantastic

Pros: Rugged Construction Increases Efficiency

Yes, I recommend this product.

Great carb

Rated by Joe on July 26, 2016

Summary: Using on a Ford flathead to replace a 2x2 intake. Excellent performance with only minor adjustments.

Pros: Minor Adjustments Made Runs Great Engine Started Right Up

Cons: None

Yes, I recommend this product.

Related Items / Suggested Parts Moroso 64945 Phenolic Insulating Carb Spacer for Holley 390 Offenhauser 5497 Universal Cross Ram Adapter Holley/Edelbrock to Carter WCFB 4-Barrel Carburetor Adapter Plate Holley 37-720 Renew 4 Barrel Carb Rebuild Kit, Model 4160, 390 CFM Holley 26-25 Banjo Swivel Fitting for 5/16 Hose, 9/16-24 Shipping

Shipping Policy:

  • Please pay for all items at the same time.
  • If shipping rates do not combine properly, contact us or send a buyer requested total.
  • You must contact us before making payment to combine your items.
  • Failure to do so will result in separate shipping fees for each individual item.
  • We cannot combine your order if you have already paid.
Some products are too large for standard ground delivery and must be shipped via truck freight. When possible, please provide a business or commercial address for delivery to eliminate additional fees. Please ensure the phone number provided is accurate to avoid delays. Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned. Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 66 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries. Return Policy We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund or an exchange. Refunds will be processed (1) day after the item is received by Speedway. All exchanged or returned merchandise must be in original factory condition with no modifications or alterations.

Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS. All exchanges need to have reshipping charges included.

All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise. Payment
  • Accepted Payment Methods - PayPal and major credit cards are accepted. Sales tax applies to the following states: 7.25% in Nebraska, 7.0% in Indiana, 6.0% in Kentucky, and 9.5% in Washington.
  • Terms - Immediate payment is required on all listings.
Guarantee Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, the customer will be refunded in full or sent the correct item at no additional cost. Disclaimer Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.

View more info...

See what other people are watching